Hummix™ Acoustic Mixer


Hummix™ Acoustic Mixer
Hummix™ Acoustic Mixers represent the "state-of-the-art" for all liquid / liquid and liquid / gas mixing applications. Acoustic mixing provides consistent, completely uniform output with a single pass.

How it works...
The heart of the system is the Hummix™ in-line acoustic vibrating reed mixer. The system requires no electro-mechanical mixing equipment or motor driven propellor. The energy of the flowing liquid causes cavitation of the in-line reed to vibrate 500 times a second. The vigorous mixing delivers a completely homogenous solution.

Cost Effective...
Hinsilblon's Hummix™ system requires less equipment and therefore less capital expenditure. There are no variable speed motors, transfer tanks, pumps, seals, bearings, propellors or large activation chambers required to purchase. The additive is pumped directly into the water pipe and the in-line Hummix™ mixer completely blends the two together.

Applications...
Mixers from 1/4 gallon per minute to one million gallons per day.

Water Treatment
Waste Water Treatment
Aeration
Chemical Mixing
Polymer Activation
Adhesive Foaming

Advantages...
• Manufactured from 316 Stainless Steel or Titanium for unsurpassed strength.
• One piece welded construction with no maintenance replacement parts.
• Continuous and complete mixing of the components in a single pass.
• No electro-mechanical equipment required.
• No down time or lost product.

Hummix Operating Chart • Polymer Feed Rates • Gallons Per Hour
Hummix Model Hummix Dilution Water GPM
Final Diluted Polymer Percentage
    0.1% 0.2% 0.3% 0.4% 0.5% 0.6%
   
Polymer Gallons Per Hour
50A 1 0.06 0.12 0.18 0.24 0.30 0.36
50A 2 0.12 0.24 0.36 0.48 0.60 0.72
50A or 50B 3 0.18 0.36 0.54 0.72 0.90 1.08
50B 4 0.24 0.48 0.72 0.96 1.20 1.44
50B 5 0.30 0.60 0.90 1.20 1.50 1.80
50B 6 0.36 0.72 1.08 1.44 1.80 2.16
50B or 100A 7 0.42 0.84 1.26 1.68 2.10 2.52
100A 8 0.48 0.96 1.44 1.92 2.40 2.88
100A 9 0.54 1.08 1.62 2.16 2.70 3.24
100A 10 0.60 1.20 1.80 2.40 3.00 3.60
100A 11 0.66 1.32 1.98 2.64 3.30 3.96
100A or 100B 12 0.72 1.44 2.16 2.88 3.60 4.32
100B 15 0.90 1.80 2.70 3.60 4.50 5.40
100B 20 1.20 2.40 3.60 4.80 6.00 7.20
200A 30 1.80 3.60 5.40 7.20 9.00 10.8
200A 40 2.40 4.80 7.20 9.60 12.0 14.4

Typical Sludge Dewatering
Final diluted flow: 5-10% of total sludge flow
ie: 100 GPM sludge, 5-10 GPM diluted polymer

Typical Polymer Dilution
0.1-0.6% with water
Average system: 0.2%